Filter
Top Products
Pelco Manual C543M-A (7/03) 29
CM9760-RPM (Rear Panel Output BNC Card for CM9760-VMC)
What Does It Look Like?
The CM9760-RPM rear panel output card is associated with the CM9760-VMC
card. Note that the RPM card contains termination jumpers that must always be set
in the unterminated position. The device to which the RPM card passes its signal is
the point where termination should take place (e.g., a monitor).
What Are Its Functions?
1. Provides signal path for Video Output Card
2. Provides physical BNC connection for external use of Video signal (monitor,
VCR, etc.)
Where Is It Installed?
The card is slot specific and MUST always be installed in the rear position that
corresponds to the front loaded Video Output Card position as viewed from the
front of the matrix bay, which is
slot 17 (refer to Figure 11 or 14).
Figure 20. CM9760-RPM Video Output Card
DOWNFRAME
CONNECTOR
JP1-JP16
3
2
1
UNTERMINATED
TERMINATED
16 VIDEO INPUT BNCs