Filter
Top Products
Pelco Manual C543M-A (7/03) 41
When downframing more than one bay, the intervening bays between the first and
the last contain DFC cards. The last bay in the downframe configuration can con-
tain DFC or DFL cards. Figure 31 illustrates a downframe configuration that uses
DFC cards rather than DFL cards in the last bay.
In Figure 31, note the following:
• The termination jumpers on the RPC cards in the first bay (bay 1) must be in
the unterminated position.
• The termination jumpers on the DFC cards in the intermediate bays (bays 2-7)
must be in the unterminated position.
• The termination jumpers on the DFC cards in the last bay (bay 8) must be in
the terminated position.
Figure 31. Downframe Configuration–256 Cameras x 128 Monitors
JUMPER CARD TYPE SLOT POSITIONS
BAY 8
BAY 7
BAY 6
BAY 5
BAY 4
BAY 3
BAY 2
BAY 1
(VIDEO IN)
SLOT POSITION
17
DOWNFRAME CABLES
128 MONITORS