Filter
Top Products
User Setup (cont'd)
29
Time/Date Setup
You can set the time and date from the Set Time & Date screen.
• When the time is set it is stored in the keypad and sent to the control panel when you press the Apply icon and answer Yes to
the following prompt. Additionally, when using the keypad, the panel may download its time into the keypad periodically after
the clock is set (for Vista residential and newer commercial panels such as Vista 128BPT).
• If Get Time is pressed, the keypad downloads the time and date from the control panel and exits the Set Time & Date screen.
Note: This icon (
) appears with residential panels and may not appear with all commercial panels.
Setting Daylight Savings Time
To set the daylight savings time, do the following:
ICON ACTION NOTES
1. From the “Home” screen, press the Setup and System
Setup icons.
2. Press the Time/Date Setup icon; enter an Authorized Code.
3. Press the DST icon if you want daylight savings time to
affect your system clock.
If DST On is selected, the keypad adjusts for Daylight
Savings time at the month, week and time chosen
.
4. Set the “Start DST” time and then the “End DST” time by
pressing the Month, Weekend and Hour that you want
DST to start.
5. APPLY saves the settings.
Make sure "DST On” is checked to enable this feature.
Setting Current Time and Date
To set the current time, do the following:
ICON ACTION NOTES
1. Press the Time/Date Setup icon; enter an Authorized Code.
2. Press the Month "arrow"; and select the current month.
3. Press the Year that is being displayed and enter the
current year.
4. Press the Hour that is being displayed and enter the
current hour.
5. Press the Minutes that is being displayed and enter the
current minute.
6. Press AM or PM.
(Each depression switches the AM/PM display).
7. Press the MMDDYY “arrow”, and select a format for which
you want the year to be displayed.
8. Press Apply.
After each selection the window closes automatically and
the selection is displayed.
Select if you want a 12-hour or 24-hour format for your
time display by pressing the circle to the left of the 12 Hour
display.
A confirmation screen is displays:
“Time Setting Confirmation
Set time on the security system as well?”
Yes or No
Yes saves the time changes in your security system.
No saves the changes to the keypad only.
Note: A Yes response is recommended.