Filter
Top Products
Multi-Media (cont’d)
24
ICON ACTION NOTES
6. To remove an image from the slide show, select
the image, and press the Deselect Image icon.
To set a picture as wallpaper:
1. Use the slide bar to scroll through the list of
pictures and highlight the file you want to be
displayed on the keypad screen.
2. Press the Set Wallpaper icon; view your selection
from the “Home” screen.
Press the TOP button to move up one level in the directory.
Press the OPEN button to view larger images and/or open directories,
select from the list of stored images.
Press the CLEAR ALL button to clear all pictures from the current slide
show rotation.
NOTE: On the “Home” screen press the Minimize Home icon to reduce
the “Home” screen icons and to have better visibility of the Wallpaper.
Press the Maximize Home icon to maximize the “Home” screen icons.
Picture Icons
Play
Image
Previous
Image
Next
Image
Add
Image
Deselect
Image
Set
Wallpaper
Minimize Home
Maximize Home
Camera Setup
The Camera feature allows you to enroll cameras and view up to four cameras at one time using the quadrant view feature. If
using existing (mounted) cameras, go to Step 4 below. If this is a first time setup, scan/configure the cameras prior to
mounting and then follow the steps below.
To set up a camera, do the following:
ICON ACTION NOTES
1. Connect an Ethernet cable to the back of your
camera (LAN); connect the opposite end to the
Ethernet port on your router.
2. Apply power to the Camera. It may take a few
seconds for initial power-up of camera.
3. Press the Multi-Media and Camera icons (or
press the Camera icon from the “Home” screen)
and then press the Camera Setup icon.
4. Press the Scan icon to locate the camera. The
screen displays: “
Scanning For Cameras. Please
Wait… “
Notes:
1. QuickTime
®
media player must be installed on your PC.
2. Camera resolution should be 5 fps (5 frames per second) or lower.
3. Camera viewing is not compatible if using Opera web browser.
4. Compatible cameras include: iPCAM-PT, iPCAM-WO and iPCAM-WI2
(and WI2B).
Note: Some older versions of these cameras may need a firmware
upgrade; see separate instructions.
IMPORTANT: Use the web browser to view cameras for non-security
purposes only. Camera streams viewed from the web browser can stop
without indication due to network connection issues.
Initial camera setup cannot be performed over a wireless connection.