Setup (cont’d)
20
Web Server/Hosting
The Tuxedo Touch keypad offers web-hosting capability allowing you to access your Security and Home Automation System via
any web enabled device. The Tuxedo Touch Keypad’s ‘IP Address’ is used on a standard web browser to control user functions such
as, Security, Z-Wave operation, and camera viewing.
U
L
Web Server/Hosting is not Listed for use in UL installations. Remote arming/disarming/programming is not to be used in UL
Listed Installations.
IP Setup
Follow the steps below to control your local Z-Wave devices via your PC, Smart Phone or Tablet.
Automatic IP Addresses
In most cases, IP addresses are assigned ‘automatically’ (Automatic IP Address). The IP Address is displayed in the lower left-
hand corner on the Tuxedo Touch Keypad “Home” screen. To access “IP Setup”, do the following:
ICON
ACTION
NOTES
1. At the Tuxedo Touch keypad:
a) Press the Setup icon from the “Home” screen.
b) Press the IP Setup icon; the “IP Setup”
screen displays the IP Address and Default
Gateway Address of the router.
c) Press the Refresh button; the IP information
will automatically update. This may take up
to 60 seconds.
d) Press Apply; the keypad will save the
information and reset.
After proper setup, the IP Address is displayed on the
“Home” screen. Enter the IP Address displayed on the
keypad into your browser as follows:
2. From your PC, Smart Phone or Tablet:
- Navigate to the Settings feature
- Turn ON the “Wi-Fi” setting
- Select the router to connect to
- Enter a name and password, if required
- Enter the IP Address displayed on the keypad
into your browser.
If the IP Address is not displayed, go to the “Fixed IP Addresses”
Section below.
• If using a Smart Phone or Tablet browser, access to basic arming
commands are available.
•
If using a PC, full access to keypad options are available.
IMPORTANT: Use the web browser to view cameras for non-security
purpose only. Camera streams viewed from the web browser can stop
without indication due to network connection issues.