Honeywell 800-04410 Home Security System User Manual


 
Configuring via WIN-PAK
Adding a New NetAXS™ Panel
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A 71
8. Click the Advanced button to display the Advanced Options screen, and select the desired
advanced options. Note that the Advanced U option is not supported for the NetAXS™ panel.
9. Display and complete the Inputs tab. If you are using the NetAXS™ inputs to monitor the door
status or activate a request to exit, then you must reassign the interlocks as indicated below. If
you are not using panel inputs for door status or egress, you only need to dissolve the
interlocks. Note that if you do not dissolve the default N-1000-IV interlocks, an error will occur
during NetAXS™ panel initializations.
All Inputs tab functions are available to NetAXS™ configuration. However, not all inputs are
available and their default functions have changed. NetAXS™ supports inputs 1-14. The
default functions are listed below. Their default values are assumed to be zero, unless otherwise
noted. You must change the interlocking.