Filter
Top Products
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A 1
1
Connecting to the Web Server
In this chapter...
1.1 Overview
A NetAXS™ access control site is configured with a host system and NetAXS™
access control units that exceed existing N-1000-III/IV, Pro Series specifications and
approvals, and that communicate with each other and with a variety of input and
output devices. Each access control unit, or panel, has four reader ports. See the
NetAXS™ NX4L1 Installation Guide, NetAXS™ NX4S1 Installation Guide, or
NetAXS™ NX4S2 Installation Guide to view illustrations of the supported NetAXS™
system configurations.
You can communicate with the NetAXS™ access control unit either through a host
software system or by connecting to the NetAXS™ web server by an Ethernet
connection. This chapter describes how to connect to the NetAXS™ web server.
Chapter 2 describes how to use the NetAXS™ web interface after you are connected
to the NetAXS™ panel through the NetAXS™ web server. Chapter 3 describes how
to use the web server interface.
Overview 1
Connecting to the Web Server 2