Filter
Top Products
Configuring via the Web Server
Configuring the System
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A 29
2.3.3 Holidays Tab
Holidays are days when no work is scheduled at the facility. These holidays are used in time zone
configuration (see “Time Zones Tab“ on page 26).
Click the
Holidays tab:
Figure 2-10: Configuration > Time Management > Holidays Tab
The Holidays tab enables you to:
• Create a holiday.
• Modify a holiday.
• Delete a holiday.
Note: Holidays should be considered special days of a week. They are similar, but of higher rank than
the standard Monday-Sunday. If a day programmed as a Holiday should occur in the panel, the panel
will treat that day as the Holiday type, regardless of the actual day of the week (Monday-Sunday).
During this Holiday, only Time Zones that contain that specific Holiday type will work. The Holiday
allows users to further customize how the panel works. For example, the user can block access to a
building on that day, or grant special access during that day.
Each Holiday added is considered a full day, extending from midnight to midnight. The options
available when configuring a holiday are Annual, Type, Date and Year. While Annual is enabled, the
date added as a Holiday will be a Holiday every year. This disables the Annual check box and allows a
user to select a specific year, so that only during that date and year will the Holiday selection work.