Honeywell 800-04410 Home Security System User Manual


 
20 www.honeywell.com
Configuring via the Web Server
Configuring the System
2.2.4 Network Tab
Your NetAXS™ panel is physically configured in one of a number of possible network configurations.
See the “System Configuration” section in the NetAXS™ NX4L1 Installation Guide, NetAXS™ NX4S1
Installation Guide, and NetAXS™ NX4S2 Installation Guide for illustrations of the supported network
configurations. For the panel to function in any of these configurations, the other panels and devices in
the network must know the panel’s network addresses.
Click
Network to display the Network tab:
Figure 2-5: Configuration > System > Network Tab
The Network tab enables you to:
View the panel’s MAC address.
View and edit the panel’s IP address.
View and edit the panel’s subnet mask.
View and edit the panel’s default gateway.