Filter
Top Products
73
START-UP CHECKLIST
(Remove and Store in Job File)
I. PRELIMINARY INFORMATION
MODEL NO.: SERIAL NO.:
DATE: TECHNICIAN:
BUILDING LOCATION:
II. PRE-START-UP (insert checkmark in box as each item is completed)
j VERIFY THAT ALL PACKAGING MATERIALS HAVE BEEN REMOVED F ROM UNIT
j VERIFY THAT CONDENSATE CONNECTION IS INSTALLED PER INSTALLATION INSTRUCTIONS
j VERIFY THAT FLUE HOOD IS INSTALLED
j CHECK ALL ELECTRICAL CONNECTIONS AND TERMINALS FOR TIGHTNESS
j CHECK TO ENSURE NO WIRES ARE TOUCHING REFRIGERANT TUBING OR SHARP EDGES
j CHECK GAS PIPING FOR LEAKS
j CHECK THAT RETURN--AIR FILTER IS CLEAN AND IN PLACE
j VERIFY THAT UNIT INSTALLATION IS LEVEL
j CHECK FAN WHEEL AND PROPELLER FOR LOCATION IN HOUSING/ORIFICE AND VERIFY SETSCREW IS
TIGHT
j VERIFY PULLEY ALIGNMENT AND BELT TENSION ARE CORRECT
III. START-UP
ELECTRICAL
SUPPLY VOLTAGE L1-L2 L2-L3 L3-L1
COMPRESSOR AMPS L1
L2 L2
INDOOR FAN AMPS L1 L2 L2
TEMPERAT URES
OUTDOOR-AIR TEMPERATURE DB WB
RETURN-AIR TEMPERATURE
DB WB
COOLING SUPPLY AIR
DB WB
GAS HEAT SUPPLY AIR
DB
PRESSURES
GAS INLET PRESSURE IN. WG
GAS MANIFOLD PRESSURE
IN. WG (LOW FIRE) IN. WG (HI FIRE)
REFRIGERANT SUCTION
PSIG TEMP _F
REFRIGERANT DISCHARGE
PSIG TEMP _F
j VERIFY PULLEY ALIGNMENT AND BELT TENSION ARE CORRECT
j VERIFY REFRIGERANT CHARGE USING CHARGING CHARTS
j VERIFY THAT 3--PHASE SCROLL COMPRESSOR IS ROTATING IN CORRECT DIRECTION
Manufacturer reserves the right todiscontinue, or changeat any time,specifications or designs without notice andwithout incurring obligations.
E2008 Bryant Heating &Cooling SystemsD 7310 W.MorrisSt. D Indianapolis, IN 46231 Printed inU.S.A. Edition Date: 07/08
Replaces:NEW
Catalog No. SM580J---01
580J