Brother PR-650 Sewing Machine User Manual


 
Hooping the Fabric 91
3
——
—————————————————————————————————————————————————————————————
—————————————————————
Hooping the Fabric
Hooping the fabric in the extra-large and large embroidery frames
1
Loosen the screw on the outer frame.
1 Screw
2
Place the fabric with right side up on top of
the outer frame.
The outer frame does not have a front or
back side. Either side can be used as the
front.
3
Press the inner frame into the outer frame.
First insert the inner frame at the corner with
the screw A, next insert the nearby one
corner B, and then insert the opposite corner
C. Then insert the opposite corner of non
screw corner D.
First, align the inner and outer frames at the
corner with the screw A. Then, while lightly
pulling the fabric in the direction indicated
by arrow B so that the fabric is taut, insert
the inner frame at corner B. In the same way,
lightly pull the fabric in the direction
indicated by arrow C and insert corner C,
and then lightly pull the fabric in the
direction indicated by arrow D and insert
corner D.
Be sure that there are no wrinkles in the
fabric after it is stretched in the embroidery
frame.
4
While stretching the fabric even more,
securely tighten the screw so that the fabric
is taut.
After stretching the fabric, lightly tapping it
should produce a drum-like sound.
Firmly clamp together the inner and outer
frames so that their tops are even.
1 Outer frame
2 Inner frame
3 Right side of fabric
4 Top of inner and outer frames are even
Using the included disc-shaped
screwdriver, firmly tighten the screw.
1 Disc-shaped screwdriver
Memo
To correctly frame the fabric in the
embroidery frame, we recommend using a
flat surface.