Filter
Top Products
SELECTING/EDITING/SAVING PATTERNS
—
——————————————————————————————————————————————————————
——
166
Rotating a pattern
The pattern can be rotated between 1 and 359
degrees either clockwise or counterclockwise.
1
Touch .
X The screen shown below appears.
2
Touch the keys to adjust the pattern to the
desired angle.
Each touch of a key rotates the pattern.
1 Shows the angle of the pattern after a key is
touched to change it.
• To return the pattern to its original angle,
touch .
3
If necessary, touch the arrow keys to adjust
the position of the pattern.
For more details, refer to page 163.
4
After making the desired changes, touch
.
X The pattern editing screen appears again.
CAUTION
Memo
● If in the embroidering settings screen
is used, the entire combined pattern can
be rotated. (For details, refer to “Rotating
the entire pattern” on page 181.)
● If the pattern is too large or the pattern is
too close to the edge of the embroidery
field, all of the rotating options may not
apply.
Example: Original angle
1 Rotates 90 degrees to the right
2 Rotates 90 degrees to the left
3 Rotates 10 degrees to the left
4 Rotates 10 degrees to the right
5 Rotates 1 degree to the left
6 Rotates 1 degree to the right
7 Moves the pattern in the direction of the arrow
on the key.
8 Touch this key to close this screen.
9 Touch this key to return the pattern to its
original angle.
6
2
7
9
8
4
5
1
3
● After changing the angle of the pattern,
check the icons for the embroidery
frames that can be used and use only
the indicated frames. If a frame other
than those indicated are used, the
presser foot may hit the embroidery
frame and cause injuries.
1