Filter
Top Products
APPENDIX ——————————————————————————————————————————————————————————————————————————
——
226
Types of caps
With the machine, we recommend that the
following types of caps be embroidered.
■ Standard (Pro Style)
1 Face: Pro style
2 6 sections
■ Low Profile (Low fitting)
1 Face: Low fitting
2 6 sections
■ Golf Style
1 Face: Not divided
2 5 sections
Memo
● Check if this area 1 is covered with mesh.
Note
● There is no centerline that can be used as
a guide for placing the cap in the cap
frame. Before framing the cap, use a
charcoal pen to mark the centerline.
Otto
International,
Inc. cap model
number
(Example)
OTTO27-007
Mesh backing
on the back of
front panels
(soft or hard)
Constructed
firm front
Unconstructed
soft crown
Ease of framing
(hooping)
Easy
(Recommended)
Fairly easy
Backing 1 to 2 ply 2 to 3 ply
Otto
International,
Inc. cap model
number
(Example)
OTTO23-225 OTTO18-203
Mesh backing
on the back of
front panels
(soft or hard)
Constructed
firm front
Unconstructed
soft crown
Ease of framing
(hooping)
Very difficult
(because the
cap material
is very hard.)
Fairly easy
Backing 1 to 2 ply 2 to 3 ply
Otto
International,
Inc. cap model
number
(Example)
OTTO23-225
Mesh backing
on the back of
front panels
(soft or hard)
Constructed
firm front
Ease of framing
(hooping)
Fairly easy
Backing 1 to 2 ply