Filter
Top Products
Selecting an Embroidery Pattern 159
——
—————————————————————————————————————————————————————————————————————
—
—————————————
5
1
Remove all unnecessary patterns from the
“Removable Disk” folder on the computer.
Select the pattern data, and then move it to a
different folder, the Recycle Bin, or right-click
it and click “Delete”.
2
Place the pattern that you wish to recall into
the “Removable Disk” folder.
X After writing the data to the embroidery
machine, the key for that pattern appears
in the screen.
3
If the desired pattern can still not be written,
repeat steps
1 and 2.
■ Disconnecting the USB cable
Before disconnecting the USB cable, click the
“Unplug or Eject Hardware” icon in the taskbar
of Windows
®
Me/2000 or the “Safely Remove
Hardware” icon in the taskbar of Windows
®
XP/
Windows Vista
®
. Then, when the removable
disk can safely be removed, disconnect the USB
cable from the computer and the machine.
Windows
®
XP
Windows Vista
®
Note
● Be sure to perform the operation described
above before disconnecting the USB cable
from the computer and embroidery
machine, otherwise the computer may
malfunction, the data may not be written
correctly, or the data or data writing area
on the embroidery machine may be
damaged.
● Do not unplug a USB device/media from
this machine immediately after it has been
plugged in. Be sure to wait at least 5
seconds before unplugging the USB
device/media.