Filter
Top Products
EMBROIDERING SETTINGS
—
———————————————————————————————————————————————————————————————
——
124
Repeatedly sewing a pattern
along a diagonal
Example
1
Specify the upper-left corner as the starting
position and the lower-right corner as the
ending position.
Touch in the embroidering settings
screen to display the starting/ending position
settings screen.
For the starting position, touch so that it
changes to .
For the ending position, touch so that it
changes to .
Touch to close the starting/ending
position settings screen.
2
Sew the first embroidery pattern.
Touch to display the embroidering
screen, and then touch and press
the start/stop button.
1 Starting position
2 Ending position
3
After embroidering is finished, the machine
stops at the lower-left corner of the pattern.
4
Touch and repeat steps 2 and 3
three times.
Note
● If the next embroidery pattern of the series
will be stitched outside the embroidery
field, the following screen will appear.
Rehoop the fabric to continue to repeat
the sewing pattern. Touch and
repeat steps
2 and 3.
Memo
● If the starting position and ending position
settings are changed, instead of sewing the
patterns in a fixed direction, various
pattern designs are possible.