Filter
Top Products
Starting/Ending Position Settings 125
——
————————————————————————————————————————————————————————————
—
——————————————————————
4
Embroidering linked
characters
Follow the procedure described below to
embroider linked characters in a single row when
the pattern extends beyond the embroidery frame.
Example: Linking “DEF” to the characters “ABC”
1
Select the character patterns for “ABC”.
2
In the embroidering settings screen, touch
.
3
Touch .
X The needle bar is positioned in the lower-
left corner of the pattern. The embroidery
frame moves so that the needle is
positioned correctly.
Note
● To cancel the starting point setting and
return the starting point to the center of the
pattern, touch .
● Use to select a different starting
point for embroidering.
4
Touch to return to the embroidering
settings screen, and then touch to
continue to the embroidering screen.
X changes to while the starting
point is set in the lower-left corner of the
pattern.
5
Touch , and then press the start/
stop button to begin embroidering.
6
After the characters are embroidered, cut
the threads to a generous length, remove the
embroidery frame, and then attach the
embroidery frame again so that the
remaining characters (“DEF”) can be
embroidered.
1 End of the embroidering
7
As in step 1, select the character patterns
for “DEF”.