Filter
Top Products
SELECTING/EDITING/SAVING PATTERNS ————————————————————————————————————————————
—
122
2
Touch the keys to adjust the pattern to the
desired size.
Each touch of a key slightly enlarges or reduces
the pattern.
The size of the pattern is displayed after a key
is touched to change it.
1 Vertical length
2 Horizontal width
• The size that the pattern can be enlarged
depending on the pattern or character.
• Depending on the pattern or character, if it is
rotated 90 degrees it may be enlarged even
more.
• If the pattern is rotated, the vertical and
horizontal directions may be reversed.
• To return the pattern to its original size,
touch so that it changes to .
3
If necessary, touch the arrow keys to adjust
the position of the pattern.
For more details, refer to page 120.
4
After making the desired changes, touch
.
X The pattern editing screen appears again.
Rotating a pattern
The pattern can be rotated between 1 and 359
degrees either clockwise or counterclockwise.
1
Touch .
X The screen shown below appears.
● After changing the size of the pattern,
check the icons for the embroidery
frames that can be used and use only the
indicated frames. If a frame other than
those indicated are used, the presser foot
may hit the embroidery frame and cause
injuries.
CAUTION
Example: Original angle
1 Rotates 90 degrees to the left
2 Rotates 10 degrees to the left
3 Rotates 1 degree to the left
4 Rotates 90 degrees to the right
5 Rotates 10 degrees to the right
6 Rotates 1 degree to the right
7 Touch this key to return the pattern to its original
angle.
8 Moves the pattern in the direction of the arrow on
the key.
9 Touch this key to close this screen.
Sapphire_brother.book Page 122 Thursday, November 17, 2005 3:00 PM