Filter
Top Products
Selecting an Embroidery Pattern 115
5
Note
● While data is being written, do not
disconnect the USB cable.
● Do not create folders within the
"Removable Disk" folder. Even if folders
have been created, they will not appear in
the machine's screen.
● While the machine is sewing, do not write
data to or delete data from “Removable
Disk”.
2
Touch .
X The list of patterns is displayed.
3
Select an embroidery pattern.
Touch the desired pattern.
• If you decide not to recall the pattern, press
.
X The selected pattern appears in the pattern
display area.
• If the wrong pattern was selected or you
wish to select a different pattern, touch the
desired pattern.
Memo
● For details on large-size embroidery
patterns, refer to PE-DESIGN instruction
Manual.
• To add a pattern from the computer, repeat
step
1.
X The following screen appears while data is
written to the embroidery machine, and the
key for that pattern appears when writing is
finished.
4
Touch .
This confirms the pattern selection.
X The pattern editing screen appears.
Note
● The pattern recalled from the computer is
only temporarily written to the machine. It
is erased from the machine when the
machine is turned off. If you wish to keep
the pattern, store it in the machine. (Refer to
“Machine’s Memory” on page 136.)
Sapphire_brother.book Page 115 Thursday, November 17, 2005 3:00 PM