Filter
Top Products
EMBROIDERING SETTINGS ——————————————————————————————————————————————————
—
96
Reserved Needle Bar Settings
Normally, the machine automatically assigns thread colors to the needle bars; however, a specific thread color
can be manually assigned to a certain needle bar. If a needle bar is specified, that needle bar is removed from
the machine’s automatic assignments and the specified color remains assigned to it.
By specifically assigning often used thread colors to certain needle bars, the trouble of changing the thread
spools can be reduced.
Once a manual needle bar setting is specified, it
remains applied until the setting is cancelled.
The manual needle bar settings can be specified in
the third page of the settings screen.
1
Touch , and then touch and to
display the third page of the settings screen.
2
Touch , , , , or for the
number of the needle bar that you wish to
specify.
1 Indicates the number of the selected needle bar
3
Select the color to be assigned to the needle
bar.
Touch , ,
and until the
color that you wish to select from the thread
table appears enlarged.
1 The color that appears enlarged is the color that is
selected.
2 Displays the color that is selected and its name
X Highlighting a color square moves in the
direction of the arrow on the key that is
touched.
4
Touch .
X The color selected in step
3 is specified.
1 The selected color of thread and the anchor
appear on the spool.
Sapphire_brother.book Page 96 Thursday, November 17, 2005 3:00 PM