Filter
Top Products
ControlCenter4
76
3
NOTE
• Secure PDF is also available for Scan to E-mail and Scan to File.
• You can change the data compression ratio of the scanned image with File size.
OCR tab 3
Lets you configure settings for Scan to OCR by pressing the Scan button on your Brother machine.
Choose the settings for File Type, Target Application, OCR Language, Destination File Path,
Resolution, Scan Type, Document Size, Brightness, Contrast and Advanced Settings as needed. Click
OK.
E-mail tab
3
Lets you configure settings for Scan to E-mail by pressing the Scan button on your Brother machine.
Choose the settings for File Type, Destination File Path, File size, Resolution, Scan Type,
Document Size, Brightness, Contrast, Auto Crop and Advanced Settings as needed. Click OK.
NOTE
You can change the data compression ratio of the scanned image with File size.
File tab 3
Lets you configure settings for Scan to File by pressing the Scan button on your Brother machine.
Choose the settings for File Type, File Name, Insert Date in File Name, Destination Folder,
Show Folder, File size, Resolution, Scan Type, Document Size, Brightness, Contrast, Auto Crop and
Advanced Settings as needed. Click OK.
NOTE
• If Show Folder is checked, the destination of the scanned image to save will be shown after scanning.
• You can change the data compression ratio of the scanned image with File size.
Launching the BRAdmin utility 3
If you have installed BRAdmin Light or BRAdmin Professional 3, the BRAdmin button lets you open the
BRAdmin Light or BRAdmin Professional 3 utility.
The BRAdmin Light utility is designed for initial setup of the Brother network connected devices. It can also
search for Brother products in a TCP/IP environment, view the status and configure basic network settings,
such as the IP address. For more information, see Network User’s Guide.
If you require more advanced machine management, use the latest version of BRAdmin Professional 3 utility
that is available as a download from http://solutions.brother.com/
.
a Select the Device Settings tab.
b Click BRAdmin. The BRAdmin Light or BRAdmin Professional 3 utility dialog box appears.