Filter
Top Products
Network Scanning
223
13
c Enter the name that you want to use for the Scan to Network profile. This name will be displayed on the
LCD of the machine and can be up to 15 characters.
d The Host Address is the domain name of the CIFS server. Enter the Host Address (for example
ftp.example.com) (up to 64 characters) or the IP address (for example 192.23.56.189).
e Enter the destination folder where your document will be stored on the CIFS server (for example
brother\abc) (up to 60 characters).
f Choose the file name you want to use for the scanned document. You can choose from seven preset
and two user defined file names. The file name that will be used for your document will be the file name
you selected plus the last 6 digits of the flatbed/ADF scanner counter plus the file extension (For
example, Estimate_098765.pdf).
g Choose the scan quality from the pop-up menu. You can choose Color 100 dpi, Color 200 dpi,
Color 300 dpi, Color 600 dpi, Color Auto, B&W 100 dpi, B&W 200 dpi, B&W 300 dpi,
B&W 600 dpi, B&W Auto or User Select.
h Choose the file type for the document from the pop-up menu. You can choose PDF, JPEG or
User Select for color documents, PDF, TIFF or User Select for B/W documents.
i If you want to protect the profile, choose On from Use PIN for Authentication and enter a 4-digit PIN
number in PIN Code.
j Enter the Username that has been registered with the CIFS server for the machine (up to 96 characters).
k Enter the Password for access to the CIFS server (up to 32 characters).
l Click Submit.
m Choose Date&Time from the General tab.
n Enter the date and time used on the CIFS server.
o Choose the time zone from the drop-down list.
p Choose the Auto Daylight option. If On is chosen, the date and time will be switched automatically when
daylight saving time starts and ends.
q Click Submit.
Scan to Network using Scan to Network Profiles 13
For MFC-J4510DW/J4710DW 13
a Load your document.
b Press (Scan).
c Swipe left or right to display (to Network).