Filter
Top Products
USB cable scanning
197
12
NOTE
The Auto Crop feature is supported by technology from Reallusion, Inc.
Guidelines for Auto Crop 12
This setting is only available for documents that are rectangular or square.
If your document is too long or wide, this setting does not work properly.
You must place the documents away from the edges of the scanner glass as shown in the illustration.
You must place the documents at least 0.4 in. (10 mm) apart from each other.
Auto Crop adjusts the skew of the document on the scanner glass, but if your document is skewed more
than 10 degrees, this setting will not work.
The ADF must be empty when using Auto Crop.
The Auto Crop feature is available for up to a maximum of 16 documents depending on the size of your
documents.
For MFC-J4510DW/J4710DW
12
a Load your document.
b Open the media slot cover.
c Put a memory card or USB Flash memory drive into your machine.
The LCD screen automatically changes.
Press Scan to Media.
IMPORTANT
DO NOT remove the memory card or USB Flash memory drive while the LCD is displaying a message.
Otherwise, the card, USB Flash memory drive or data stored on the card could be damaged.
If you remove the memory card or USB Flash memory drive while the LCD is displaying the message, you
must restart your computer once before inserting the same memory card or USB Flash memory drive into
the machine. If you do not restart your computer, the data on your media could be destroyed.
d Do one of the following:
If you want to use the default settings, go to i .
If you want to change the default settings, go to e.
e Press Options.
f Choose the settings for 2-sided Scan
1
, Scan T ype, Resolution , File Ty pe, File Name,
Auto Crop, Skip Blank Page
1
and Remove Background Color as needed.
1
(For MFC-J4710DW)