Filter
Top Products
Remote Mounting the Setback Control
-56-
In the following section, the instructions detail how to Remote Mount the Setback Control.
Remove the Setback Control from the Backplate
Step 1: Remove the Setback Control from the backplate attached to the Setback Control Junction Box
Assembly. Some force may be required. This is shown in Figure 82.
Prepare the Backplate for Wiring
Step 2: Loosen the (3) slotted screws on the backplate attached to the Setback Control Junction Box
Assembly. This is shown in Figure 83.
Figure 82
Figure 83
Setback
Control
Backplate (already
installed)
Setback Control
Junction Box
Assembly
Backplate (already
installed)
Setback Control
Junction Box
Assembly
Slotted head
screwdriver
Slotted head
screws