Filter
Top Products
Accessory Module Installation
-25-
Connect the Accessory Module to the WV8840 Wire Harness
Step 25: Insert one end of the WV8840 wire harness over the edge of the Accessory Module circuit board.
This connection point is on the bottom right hand side of the circuit board, and it is shown in Figure 25.
Proceed to Step 27 when finished.
Connect the WV4460 Wire Harness to the WV4460 Gas Control
Step 26: Push the plastic connector on the WV4460 wire harness into the recessed area on the right side
of the WV4460 gas control. This is shown in Figure 26.
Figure 25
Figure 26
Accessory
Module
WV8840 Wire
Harness
WV8840 Wire
Harness
WV4460 Gas
Control
WV4460 Wire
Harness