Filter
Top Products
Accessory Module Installation
-19-
Transformer
wire harness
Assemble the Transformer and its Wire Harness
Step 13: Take one end of the transformer wire harness and slide each fork terminal under one of the
screws. This is shown in Figure 13.
Connect the Transformer and its Wire Harness
Step 14: Tighten both screws on the transformer down, as shown in Figure 14.
Transformer
wire harness
Figure 13
Figure 14
Plug-in
Transformer
Transformer
slotted screws
Plug-in
Transformer
Transformer
slotted screws
Slotted head
screwdriver
NOTICE
If the Transformer wire harness is not of sufficient length, move the nearest electrical box to
within reaching distance.