Filter
Top Products
Accessory Module Installation
-18-
Remove the Accessory Module Cover
Step 11: Using a Philips head screwdriver, loosen both screws on the Accessory Module cover, as
shown in Figure 11. The cover screws are permanently retained and cannot be completely removed.
Retain the cover for later use.
Prepare the Plug-in Transformer for Assembly
Step 12: Loosen the (2) slotted screws on the transformer. These screws are permanently retained and
cannot be completely removed. This is shown in Figure 12.
Figure 11
Figure 12
Accessory
Module base
Accessory
Module base
Philips head
screwdriver
Wiring Diagram
label
Accessory Module
cover screws
Plug-in
Transformer
Slotted screws
Slotted head
screwdriver