Filter
Top Products
Important Information
-2-
Accessory Module:
The Accessory Module is an electronic component that allows the water heater gas control to be
connected to the Protection, Performance, and Inlet Shut-off Valve Packages.
Accessory Module:
Contains:
o Accessory Module
o Plug-in transformer
o Transformer wire harness
o (2) gas control harnesses (only
(1) used per water heater)
o Wire holders
o Wire ties
o Installation & Operation Manual
o Screws
Features:
o Multi-color LED used to display status and diagnostics
o Audible alarm to sound in the event a fault occurs
o Easily mounts to the water heater or can be remote mounted
o One Accessory Module fits all diameter water heaters
o Durable construction
CONGRATULATIONS!
You have just purchased one of the finest water heater accessories on the market today!
This Installation and Operation Manual will explain in detail how to install and operate your
new Accessory Module, as well as the packages that can be connected to the Accessory
Module. We strongly recommend you contact a plumbing professional for the installation of
this new control.
We require that you carefully read this manual and your water heater manual and refer to
them when questions arise. If you have any specific questions concerning your warranty,
please consult the plumbing professional from whom your Accessory Module was
purchased. For your records, we recommend that you write the installation date for these
accessories in the back of this manual.
This manual should be kept with the Accessory Module.
NOTICE
The Accessory Module and its associated packages are for use only with Bradford White water
heaters equipped with compatible Honeywell gas controls.
The Accessory Module is always required in order to use the Protection, Performance, and/or
the Inlet Shut-off Valve Packages.
The Protection Package is required in order to use the Inlet Shut-off Valve Package.
For easier installation, the Integrated Mixing Device and Inlet Shut-off Valve should be installed
first.