Filter
Top Products
5-1
A standalone or MINIPLEX 4100 system becomes a network node when a 4100 Network
Interface Card (NIC) or other compatible network card is installed and connected to
another network node. How network cards connect to each other depends on the type of
media network cards being used.
Refer to the page number listed in this table for information on a specific topic.
Topic See Page #
Getting Started
5-2
Introduction to the 4100 Network Interface Card (NIC)
5-3
Step 1. Configuring Network Cards
5-7
Step 2. Mounting Media Cards to the NIC
5-9
Step 3. Mounting Network Cards
5-10
Step 4. Wiring Network Cards
5-11
Chapter 5
Networking
Introduction
In this Chapter