Filter
Top Products
8-1
Two loop cards are available in the 4100U 4”x 5”card format. These plug directly onto
the PDI and form an intelligent interface between the 4100U CPU and one loop of
addressable detectors/devices.
The IDNet Card uses Mapnet Protocol and communicates with existing Mapnet
detectors/devices plus the new IDNet devices.
The 4100MXP communicates with the Tyco MX range of detectors/devices.
Refer to the page number listed in this table for information on a specific topic..
Topic See Page #
The IDNet Card
8-2
Installing the IDNet Card onto the PDI
8-4
Installing the ID-Net into a 4100 Card Bay
8-5
Configuring the Card
8-6
Wiring to IDNet Devices
8-7
Troubleshooting on IDNet
8-10
The 4100MXP
8-11
Chapter 8
Installing 4100U IDNet & 4100MXP Cards
Introduction
In this Chapter