Filter
Top Products
56 RT-PRC005-EN
(10 Ton)
High Efficiency
Performance
Data
For Standard Evaporator Fan Speed (RPM), reference Table PD-56.
Table includes Dehumidification (Hot Gas Reheat Option).
*Unit applications below 3200 CFM
• Electric heaters restricted on applications below 3200 CFM.
• Dehumidification (Hot Gas Reheat) or TXV with Frostat and Crankcase Heaters are required on applications below 3200 CFM.
Notes:
Data includes pressure drop due to standard filters and wet coils.
Data does not include pressure drop due to reheat coil.
No accessories or options are included in pressure drop data.
Refer to Table PD-61 to determine additional static pressure drop due to other options/accessories
3-HP Fan Motor Heat (MBH) = 2.900 x Fan BHP+.475.
5-HP Fan Motor Heat (MBH) = 2.950 x Fan BHP+.470.
1. BAYLSDR010A Required.
1. Field Supplied Motor Sheave 1VM50 x 7/8 inch, Fan Sheave AK89, and Belt AX40 required
Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full
horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.
Table PD-55— Belt Drive Evaporator Fan Performance — 10 Ton — THC120A3,A4,AW —Horizontal Airflow
External Static Pressure (Inches of Water)
.10 .20 .30 .40 .50 .60 .70 .80 .90 1.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
3-HP Standard Motor & Low Static Drive Accessory Kit (1)
2000* — — — — 584 0.43 639 0.53 682 0.62 721 0.71 755 0.79 787 0.88 818 0.97 849 1.06
2400* — — 578 0.48 627 0.57 683 0.70 734 0.83 776 0.94 812 1.05 845 1.15 876 1.26 904 1.36
2800* 596 0.58 640 0.67 686 0.79 728 0.90 776 1.04 822 1.19 865 1.34 900 1.47 932 1.60 962 1.73
3200 671 0.85 706 0.93 748 1.06 787 1.19 824 1.32 864 1.47 906 1.64 946 1.81 983 1.97 1015 2.13
3600 746 1.18 777 1.27 811 1.39 849 1.54 883 1.68 916 1.82 950 1.98 987 2.16 1024 2.35 1060 2.55
4000 822 1.59 850 1.70 879 1.81 912 1.95 946 2.12 977 2.28 1006 2.43 1035 2.60 1067 2.79 1101 2.99
4400 898 2.09 925 2.21 950 2.32 977 2.46 1008 2.63 1039 2.81 1067 2.98 1094 3.16 1121 3.33 1147 3.52
4800 974 2.69 1000 2.83 1023 2.95 1046 3.07 1072 3.23 1101 3.42 1130 3.62 1156 3.81 1181 4.00 1206 4.19
5-HP Oversized Motor & Drive
Table PD-55 — Continued
External Static Pressure (Inches of Water)
1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
3-HP Standard Motor & Drive
2000* 877 1.15 906 1.24 933 1.33 961 1.43 988 1.54 1014 1.64 1038 1.74 1063 1.85 1087 1.96 1111 2.07
2400* 931 1.47 958 1.58 983 1.68 1008 1.78 1032 1.89 1056 2.00 1080 2.11 1103 2.22 1126 2.34 1149 2.46
2800* 989 1.84 1015 1.97 1040 2.09 1064 2.21 1087 2.34 1110 2.46 1132 2.58 1154 2.71 1176 2.83 1196 2.95
3200 1044 2.28 1072 2.42 1097 2.57 1122 2.71 1145 2.84 1168 2.99 1189 3.12 1210 3.27 1231 3.41 1250 3.54
3600 1093 2.74 1124 2.92 1151 3.09 1176 3.25 1201 3.42 1224 3.58 1246 3.74 1268 3.90 1289 4.06 1308 4.20
4000 1135 3.21 1167 3.42 1198 3.63 1227 3.84 1254 4.05 1278 4.23 1301 4.41 1323 4.60 1344 4.77 1365 4.95
4400 1177 3.73 1207 3.96 1239 4.19 1268 4.42 1297 4.67 1324 4.90 1351 5.12 1376 5.35 1398 5.56 1420 5.75
4800 1229 4.39 1254 4.59 1282 4.83 1310 5.07 1338 5.32 1365 5.58 ————————
5-HP Oversized Motor & Drive
3-HP Standard Motor & Low
Static Drive Accessory Kit (1)