Filter
Top Products
II
23
4-7. Transmitter
(1) Accessories
(2) Installation
◆ Attach the transmitter to the left side of the electrical component box in outdoor unit,
then connect the power and communication cable between the transmitter and the outdoor;
refer to the figure below.
◆ If you install a transmitter to an outdoor unit, every indoor unit which is connected to an
outdoor unit can be controlled simultaneously.
◆ Each outdoor unit connected to the same centralized controller has its own transmitter.
◆ Distance between the centralized controller and the last transmitter should be 1000 meters or less.
Transmitter (1)
CN01
F1F2
Transmitter power
cable (1)
Transmitter
communication
cable (1)
Installation
manual (1)
CN01
F1 F2
CN12
Outdoor unit
Communication cable
Transmitter PCB
Outdoor unit PCB
Electrical component box
DVM E-D/B(chapter2)-E<03759 3/21/02 7:33 PM Page 23