Filter
Top Products
II. Control System
4. Installation
II
10
4-1. Wireless remote controller
(1) Accessories
(2) Installation
Choose a position where:
◆
The signal from the remote controller will not be blocked
(by a curtain for example)
◆
The remote controller is not exposed to direct sunlight or heat
◆
The wireless remote controller is at least one meter away from
a television or stereo system to avoid generating any parasites
To attach the holder to the wall, proceed as follows.
1) With a pencil, mark the positions of the two holes on the
wall where the holder is to be installed.
2) Drill the two holes and insert plugs as required for the type
of wall on which the holder is being installed.
3) Screw the holder into position.
Wireless remote
controller(1)
Battery for
wireless remote
controller(2)
M4x12 tapped
screw(2)
Remote control
holder(1)
Owner’s
instructions(1)
Installation
manual(1)
DVM E-D/B(chapter2)-E<03759 3/21/02 7:32 PM Page 10