Filter
Top Products
II
13
(4) Example of installing wired remote controller
Individual control
Means a wired remote controller controls only 1 indoor unit. In this case, the RMC address of the
indoor unit should be the same with the address of wired remote controller.
Individual & Gr
oup control
Means a wired remote controller controls more than 2 indoor units. In this case, the RMC address
of all indoor units to be controlled by the wired remote controller should be the same with the
address of wired remote controller.
Each indoor unit is controlled with its own wired remote controller.
12
3
0 0 1 1 2 2
0 1 2
MAIN
ADDRESS
RMC
ADDRESS
SW03SW01SW02
K1 K2 K3 K4
Outdoor unit
MAIN
ADDRESS
RMC
ADDRESS
Address of wired
remote controller
MAIN
ADDRESS
RMC
ADDRESS
Address of wired
remote controller
Indoor unit PCB
An indoor unit is controlled with assigned “0” wired controller, the others
are controlled as a group by assigned “1” wired remote controller.
12
3
0 0 1 1 2 1
0 1
MAIN SW02
ADDRESS
RMC SW01
ADDRESS
SW03
K1 K2 K3 K4
Outdoor unit
Indoor unit PCB
DVM E-D/B(chapter2)-E<03759 3/21/02 7:33 PM Page 13