Filter
Top Products
34 C3662M (6/08)
5. You must change the DSServiceUser password for all services related to Digital Sentry:
• Digital Sentry Storage Service
• Digital Sentry VideoServer Service
• Digital Sentry Watch Service
• Digital Sentry VSAN Watch Service
• MSSQLSERVER
• IntegralSQLAgentService
A given system might not have all of the listed services installed.
NOTE: The default Windows
®
password for default users on all components is “dsserviceuser.” It is recommended that you change the
password, but it is not required.
CHANGING THE STARTUP MODE OF A SERVICE
1. From the Start menu, open Settings and Control Panel.
2. Open Administrative Tools.
3. Open Services.
4. Double-click the service whose startup mode you want to change.
5. Choose the Startup Type from the drop-down list:
• Automatic: The service starts automatically when the computer is started.
• Manual: You must start the service manually.
• Disabled: The service cannot be started.
6. Click OK.
STARTING AND STOPPING SERVICES
1. From the Start menu, open Settings and Control Panel.
2. Open Administrative Tools.
3. Open Services.
4. Right-click the service whose startup mode you want to change.
5. Choose Start or Stop from the pop-up menu.
CHANGING THE TIME ZONE
1. From the Start menu, open Settings and Control Panel.
2. Open Date/Time.
3. Select the Time Zone tab.
4. Select the correct time zone from the drop-down list.
5. If the time zone observes Daylight Saving Time, select “Automatically Adjust Clock for Daylight Saving Changes.” If you do not select this
for a time zone that observes Daylight Saving Time, you must adjust the clock manually on the appropriate dates.
6. If necessary, set the correct time on the Time tab.
7. When finished, click OK.