Filter
Top Products
C3662M (6/08) 17
Figure 10. Rear Panel of 4-Input DS Desktop
Figure 11. DS Desktop Audio Connector
DS 1000 INSTALLATION
To install DS 1000, refer to Figure 12 on page 18, and then complete the following steps:
1. Plug the power cord into the power connector
ì.
2. Plug a monitor into a monitor connector
î and its power cord into an electrical outlet. The top connector is for a VGA monitor, and the
bottom connector is for a DVI monitor.
3. Plug the USB keyboard into a USB connector
ï.
4. Plug the USB mouse into a USB connector ñ.
5. Plug a USB printer into a USB connector ó.
6. Plug PC speakers into the line out connector
r.
7. Item s is a SCSI card, which is used to connect to the VSAN external storage units. A chain of up to four VSAN units can be connected to
the SCSI card.
8. Item t is the audio connector bracket. From top to bottom are audio inputs 1–4, ground, audio inputs 5–8, ground, audio inputs 9–12,
ground, audio inputs 13–16, ground.
9. Connect one or both of the network ports u to a network switch, IP cameras, and so forth using Cat5 cable.
OUTPUT
INPUT 4
INPUT 3
INPUT 2
INPUT 1
115
GROUND 4
GROUND 3
GROUND 2
GROUND 1
AUDIO OUT 4
AUDIO OUT 3
AUDIO OUT 2
AUDIO OUT 1
AUDIO IN 4
AUDIO IN 3
AUDIO IN 2
AUDIO IN 1