Filter
Top Products
Parker Hannifin
150 Aries User Guide
TMTEMP
Transfer Motor Temperature
Type
Transfer
Product Rev
Syntax
<a_>TMTEMP
Aries 1.0
Units
Degrees Celsius
Range
N/A
Default
N/A
Response
TMTEMP: <*>45
See Also
DMTRWC, DMTTCM, DMTTCW, STATUS, TERRLG
The TMTEMP reports the predicted temperature of the motor winding for
Parker motors. The temperature is estimated using the winding and motor
time constants, the rated continuous current, and the winding thermal
resistance. The motor will fault (and the drive reports E35–Motor Thermal
Model Fault) at an estimated winding temperature of 125°C, assuming
the ambient temperature is 40°C.
In OS 2.10, If DMTSWT equals 3, and the thermal temperature is greater than
60°C, TMTEMP reports the higher of the motor model thermistor temperature
or the NTC thermistor temperature.
If you are using a non-Parker motor, the TMTEMP value depends on
parameters you supply for DMTRWC, DMTTCM and DMTTCW.
TOUT
Transfer Output Status
Type
Transfer
Product Rev
Syntax
<a_>TOUT
Aries 1.0
Units
N/A
Range
Ø (inactive) or 1 (active)
Default
N/A
Response
TOUT: <*>ØØØØ_ØØØØ_ØØØØ_ØØ11
See Also
none
The TOUT command returns the present status of the brake relay (bit 1) and
fault output (bit 0). Bits 2 through 15 are reserved. The return of one (1)
indicates the relevant output is active and a zero (Ø) indicates it is inactive.