Filter
Top Products
581
FX3S/FX3G/FX3GC/FX3U/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
22 External Device – FNC170 to FNC179
22.1 FNC170 – GRY / Decimal to Gray Code Conversion
21
FNC160-FNC169
Real Time Clock
Control
22
FNC170-FNC179
External Device
23
FNC180
Alternate
Instructions
24
FNC181-FNC189
Others
25
FNC190-FNC199
Block Data
Operation
26
FNC200-FNC209
Character String
Control
27
FNC210-FNC219
Data
Operation 3
28
FNC220-FNC249
Data
Comparison
29
FNC250-FNC269
Data Table
Operation
30
FNC270-FNC276
Ex-Device
22.1 FNC170 – GRY / Decimal to Gray Code Conversion
Outline
This instruction converts a binary value into a gray code, and transfers it.
1. Instruction format
2. Set data
3. Applicable devices
S1: This function is supported only in FX3G/FX3GC/FX3U/FX3UC PLCs.
S2: This function is supported only in FX3U/FX3UC PLCs.
Explanation of function and operation
1. 16-bit operation (GRY and GRYP)
- can store a value from 0 to 32767.
2. 32-bit operation (DGRY and DGRYP)
- A binary value can be converted into a gray code of up to 32 bits.
- can store a value from 0 to 2,147,483,647.
Caution
The data conversion speed depends on the scan time of the PLC.
Operand Type Description Data Type
Conversion source data or word device storing conversion source data 16- or 32-bit binary
Word device storing data after conversion 16- or 32-bit binary
Oper-
and
Type
Bit Devices Word Devices Others
System User Digit Specification System User
Special
Unit
Index
Con-
stant
Real
Number
Charac-
ter String
Pointer
XYMTCSD
.b KnX KnY KnM KnS T C D R
U\G
V Z Modify K H E "
"P
S1 S2
S1 S2
DGRY
DGRYP
Mnemonic Operation Condition
P
FNC 170
GRY
D
16-bit Instruction
5 steps
GRY
GRYP
Mnemonic Operation Condition
Continuous
Operation
Pulse (Single)
Operation
32-bit Instruction
9 steps
Continuous
Operation
Pulse (Single)
Operation
S
D
S
D
BIN 1234
110111010110
0100101100100000
b0
b15
This instruction converts and transfers data from
the source (binary) to the destination (gray code).
FNC170
GRY
Y23 Y20Y17 Y10
GRY 1234
When is K1234 and is K3Y10
Command
input
D
S
S
D
S
S