Filter
Top Products
ii
T
ABLE OF
C
ONTENTS
Introduction................................................................................................1
Opening the MX001 Industrial Control Box...............................................2
Internal Components.................................................................................3
LED Status Indicators ...............................................................................4
Configuring the MX001 for 115 or 230 Volt Operation
USA: 115V Operation............................................................................5
USA: 230V Operation............................................................................6
Europe/Asia:230V Operation.................................................................7
Europe/Asia: 115V Operation................................................................8
Locating the Three Strain Reliefs and the Signal Connector....................9
Connecting External Wiring to the MX001................................................9
Power Requirements for the MX001.........................................................9
Connecting the AC Power Input Cable ...................................................10
Connecting the TRIAC Controlled Power Output Cable.........................11
Temporarily Disabling the TRIAC Output................................................12
Sensor Support .......................................................................................13
Connecting the Sensor........................................................................14
Temporarily Disabling the Sensor and/or Sensor Alarm.....................14
Sensors Powered Independently that Provide
either 12V, 5V or a 10mA DC Output Signal.......................................15
Sensors that Provide Switch Closures or Relay Type Output.............17
Low Voltage Self-Contained DC Sensors with
a Current Sinking Output.....................................................................18
Low Voltage Self-Contained DC Sensors with
a Current Sourcing Output..................................................................19
Universal Self-Contained Sensors that Provide
a Single Pole/Double Throw (SPDT) Relay Output.............................20