JVC HR-S7960E Indoor Furnishings User Manual


 
Masterpage:Right-NoTitle0
EN 59
Filename [HRS7960E5-EN.fm]
Page 59 April 22, 2003 3:07 pm
Clock Set
A
Turn on the recorder.
Press 1.
B
Access the Main Menu screen.
Press MENU.
C
Access the Initial Set screen.
Press rt to move the highlight bar (pointer) to “INITIAL
SET”, then press OK or
e.
D
Access the Clock Set screen.
Press rt to move the highlight bar (pointer) to “CLOCK
SET”, then press OK or
e. The Clock Set screen appears.
NOTE:
When you have selected MAGYARORSZÁG, CESKÁ
REPUBLIKA, POLSKA or OTHER EASTERN EUROPE for the
country setting (
pg. 12, 16), you cannot use Just Clock
function. Skip steps 6 and 7 on page 60.
Turn on the TV and select the video channel (or
AV mode).
Just Clock
The Just Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The Just Clock option can be set “ON” or “OFF” at the Clock
Set screen (the default setting is “OFF”). Press OK until the
Just Clock setting begins blinking, then press
rt to change
the setting.
IMPORTANT: If you turn off Just Clock, the accuracy of your
recorder’s built-in clock may be reduced, which could
adversely effect timer recording. We recommend you to keep
Just Clock on. In cases where the clock setting data from a
PDC signal is incorrect, however, you are advised to keep
Just Clock set to “OFF”.
IMPORTANT
If you performed Auto Set Up ( pg. 12) or Preset
Download (
pg. 14), without ever having set the clock
previously, the recorder’s built-in clock is also set
automatically.
Perform the following steps only if —
—Auto Clock Set has not been performed correctly by Auto
Set Up or Preset Download.
OR
—you want to change Just Clock setting (
“Just Clock” in
the left column).
HRS7960E-EN.book Page 59 Tuesday, April 22, 2003 3:07 PM