Open as PDF
Page 46 April 22, 2003 3:07 pm
SYSTEM CONNECTIONS (cont.)
The AV2 (L-2) IN/DECODER connector can be used as an
input connector for an external decoder (descrambler).
Simply connect a decoder and you can enjoy the variety
of programming that is available through scrambled
Select the input mode.
Set “L-2 SELECT” to “DECODER”. (੬ pg. 43)
Connect the decoder.
Connect your recorder’s AV2 (L-2) IN/DECODER
connector to the decoder’s 21-pin SCART connector
using a 21-pin SCART cable.
Set the tuner.
Perform the procedure as described in “When Receiving
A Scrambled Broadcast” on page 56.
AV1 (L-1) IN/OUT
AV2 (L-2) IN/DECODER
HRS7960E-EN.book Page 46 Tuesday, April 22, 2003 3:07 PM