Filter
Top Products
Filename [HRS7960E4-EN.fm]
Masterpage:Left
40 EN
Page 40 April 22, 2003 3:07 pm
EDITING
Edit From A
Camcorder
You can use a camcorder as the source player and your
recorder as the recording deck.
A
Make connections.
A If the camcorder has no S-VIDEO output connector ...
... connect the camcorder’s AUDIO OUT and VIDEO
OUT connectors to the recorder’s front panel AUDIO
and VIDEO input connectors.
B If the camcorder has an S-VIDEO output connector ...
... connect the camcorder’s AUDIO OUT and
S-VIDEO OUT connectors to the recorder’s front panel
AUDIO and S-VIDEO input connectors.
● When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your recorder.
B
Set the recorder’s input mode.
Press AUX (number key “0”) and/or PR to select “F-1” for
the AUDIO and VIDEO input connectors, or “S-1” for the
AUDIO and S-VIDEO input connectors, depending on
the connectors being used.
C
Set the edit mode.
See “PICTURE CONTROL” on page 49.
D
Start the camcorder.
Engage the Play mode of the camcorder.
E
Start the recorder.
Engage the Record mode of the recorder.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select “EDIT” to dub tapes in step 3, be sure to
select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.
A If the camcorder has no S-VIDEO output connector ...
B If the camcorder has an S-VIDEO output connector ...
Recorder
AUDIO OUT
VIDEO OUT
Camcorder
AUDIO
input
Player
VIDEO
input
Video cable (not provided)
Recorder
Audio cable (not provided)
S-VIDEO OUT
AUDIO OUT
Camcorder
S-VIDEO
input
Player
AUDIO
input
S-Video cable (not provided)
Audio cable (not provided)
HRS7960E-EN.book Page 40 Tuesday, April 22, 2003 3:07 PM