Filter
Top Products
Chapter 4 Selecting and Transferring Embroidery Data
BES-962BC • BES-1262BC
78
Renaming Data
Renames the registered embroidery data.
Data name consists of the name area and three characters called "extension"
which indicates data type. Enter ".ECS" at the end of the data name.
Upper and lower cases are not distinguished in the data name.
1. Click data for selection.
The frame of selected data turns red.
2. Select [Rename] from Edit menu or click .
3. Enter a new data name.
Enter a data name including extension.
4. Click [OK].
extension