Filter
Top Products
BES-962BC • BES-1262BC
19
Chapter 1 An Introduction of Embroidery Machine
2-5 Basic Operation of Software
This section explains the basics of using the software. It covers only the operating
procedures that are commonly used for the software. If there are any special
operating procedures inherent to a program, they are explained in each section.
How to Use the Mouse
When selecting an icon or a menu displayed on the screen, move the white arrow
pointer on the screen to the required position, then press the button on the mouse.
Place the mouse on a flat, smooth surface and move it by sliding on it. The white
arrow pointer moves along the mouse motion.
The mouse has two buttons. The left one is used in general. There are three ways
of operating the mouse button as described below:
Click
Press the left button of the mouse once.
"Click [xx]" means moving the white arrow pointer to "xx" and pressing the left
button once.