Filter
Top Products
BES-962BC • BES-1262BC
165
Chapter 6 Embroidering
Thin Material or Thick Material
Adjusts the timing of needle drop and hoop movement.
The value can be designated between 95 and 125 degrees in units of 1 degree.
The smaller values are suitable for thick material and the larger ones are suitable
for thin material.
1. Select [Thin material or thick material] from Settings menu.
2. Adjust the value by moving the slide bar control. Click [OK] when it is set.
Clicking this button
will reset the value to
the standard one
(110).
The selected value
is displayed.