Filter
Top Products
Chapter 5 Editing Embroidery Data
BES-962BC • BES-1262BC
100
Needle Penetration
Chooses whether or not the needle pevetration positions are displayed.
1. Select [Needle Penetration] from View menu.
Before selecting After selecting
Embroidering Start/End
Displays start and end points as "S" and "E" on the screen respectively.
If points "S" and "E" are identical, "E" has priority over "S".
1. Select [Embroidering Start/End] from View menu.
Before selecting After selecting
Trim and pause
Displays the position of the trim code and the pause code.
Trim is displayed by X and pause is displayed by
.
1. Select [Trim and pause] from the View menu.