Filter
Top Products
BES-962BC • BES-1262BC
64
Chapter 3 Embroidering Procedures
Register the Machine Name
Enter the machine name if the software is run for the first time or when a new
machine is connected.
1. Enter a machine name.
2. Click [OK].
Retrieve the Embroidery Data
1. Click .
The embroidery data explorer starts up.
2. Double-click the desired data or click after clicking the desired data.
3. The selected data is transferred to the machine controller.
4. Click .
The data is transferred to the machine for preparation of embroidering.
Select an identifying color for the
machine.
This color is shown on the title
bar for a while when the arrow
pointer is moved to the title bar
of a machine window.