Filter
Top Products
BES-962BC • BES-1262BC
188
Chapter 6 Embroidering
Running Other Programs
Other programs can be started when the machine power is not turned on or when the machine is in
operation for embroidery.
The following programs can be started:
Embroidery data explorer Allows transfer and copy of the embroidery data.
Data transfer to the machine controller is not allowed.
Embroidery data editor Allows editing of embroidery data.
Production report Allows display and print-out of production data, etc.
1. Select [Embroidery Data Explorer independently] or [Embroidery Data
Editor independently] from Tool menu.
Selecting [Embroidery Data Edit Individual Start]
Input the number of needle bars. Input the number according to your machine
specifications. Click [OK].
Click this to increase or decrease the value.