Filter
Top Products
Turning ON the Machine 39
2
——
—————————————————————————————————————————————————————————————
—
—————————————————————
Understanding the screens
When the machine is turned on and is touched, the pattern type selection screen appears. The
operations described below will be entered using the operation panel. For precautions concerning the use of
the touch panel, refer to page 34.
* The keys in the table above appear and can be used in most of the screens described later in this manual.
No. Display Key Name Function
Reference
Page
1 Home key
Touch this key to cancel all operations previously
performed and return to the initial pattern group
selection screen.
2
Pattern display
area
This area displays the selected pattern. p. 196
3
Embroidering
area line
Shows the embroidering area for the extra-large
embroidery frame. The embroidery frame indications,
the grid lines and other display settings can be specified
from the machine settings screen.
p. 196
4
Machine
operations guide
key
Touch this key to check a machine operation. p.206
5
Needle bar move
key
Touch this key to move or thread a selected needle bar.
This key is available in any screen.
p. 61
6 Settings key
Touch this key to change the embroidery machine
settings.
p. 194
6
5
1
4
3
2