Filter
Top Products
Precautions 139
——
—————————————————————————————————————————————————————————————————————
—
—————————————
5
Concerning USB media
• Do not disassemble or alter the USB media.
• Do not allow the USB media to become wet, such as with water, solvents, drinks or any other
liquids.
• Do not use or store the USB media in a location exposed to strong static electricity or
electrical interference.
• Do not use or store USB media in locations exposed to vibrations or impacts, direct sunlight,
extreme dust (or lint), high temperatures, high humidity, severe temperature fluctuations, or
strong magnetic forces (such as from speakers).
• While embroidery data is being recalled from the USB media, do not allow the machine to be
exposed to vibrations or impacts, and do not attempt to remove the USB media from the machine.
• Some USB media may not be usable with this machine. Please visit our web site for more
details.
• Only remove USB media while an access lamp on the USB media is not flashing (refer to
page 160).
• For additional information, refer to the instruction manual included with the USB media that
you have purchased.
• Do not unplug a USB device/media from this machine immediately after it has been plugged
in. Be sure to wait at least 5 seconds before unplugging the USB device/media.