Brother 884-T05 Sewing Machine User Manual


 
APPENDIX ——————————————————————————————————————————————————————————————————————————
——
226
Types of caps
With the machine, we recommend that the
following types of caps be embroidered.
Standard (Pro Style)
1 Face: Pro style
2 6 sections
Low Profile (Low fitting)
1 Face: Low fitting
2 6 sections
Golf Style
1 Face: Not divided
2 5 sections
Memo
Check if this area 1 is covered with mesh.
Note
There is no centerline that can be used as
a guide for placing the cap in the cap
frame. Before framing the cap, use a
charcoal pen to mark the centerline.
Otto
International,
Inc. cap model
number
(Example)
OTTO27-007
Mesh backing
on the back of
front panels
(soft or hard)
Constructed
firm front
Unconstructed
soft crown
Ease of framing
(hooping)
Easy
(Recommended)
Fairly easy
Backing 1 to 2 ply 2 to 3 ply
Otto
International,
Inc. cap model
number
(Example)
OTTO23-225 OTTO18-203
Mesh backing
on the back of
front panels
(soft or hard)
Constructed
firm front
Unconstructed
soft crown
Ease of framing
(hooping)
Very difficult
(because the
cap material
is very hard.)
Fairly easy
Backing 1 to 2 ply 2 to 3 ply
Otto
International,
Inc. cap model
number
(Example)
OTTO23-225
Mesh backing
on the back of
front panels
(soft or hard)
Constructed
firm front
Ease of framing
(hooping)
Fairly easy
Backing 1 to 2 ply